Results 1 to 9 of 9

Thread: Mirage Drive & Duct tape

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2016
    Location
    New Windsor, MD Carroll County
    Posts
    209

    Default Mirage Drive & Duct tape

    For you Hobie guys, do any of you "duct tape" the front of your Mirage drive Fins?? I was reading on another forum where some guys do it to, protect and relieve the stress on the front part of the fin. Has anyone ever heard of this and/or done it??
    2017 Hobie Camo Outback
    2016 Vibe Sea Ghost

  2. #2
    Join Date
    Apr 2013
    Location
    Pasadena, MD
    Posts
    2,604

    Default

    I do not. The fins are fairly thick on the front edge already.
    Mark

    Olive Hobie Revo 13
    Hidden Oak Native Ultimate 12

    Author: The Simple Joys of Kayak Fishing (Tips and Tales From an Old Guy in His Plastic Boat)
    Available on Amazon.com

  3. #3
    Join Date
    Mar 2015
    Location
    Ocean City MD
    Posts
    133

    Default

    I'm fishing an area that is rough, & just bought new 180 drive, I think it's a great idea.
    Red 2015 Hobie Outback
    Olive 2015 PA 14

  4. #4
    Join Date
    May 2016
    Location
    New Windsor, MD Carroll County
    Posts
    209

    Default

    They only do the front edge of the drive. Basically one 2" piece all the way down the front. It makes sense I just didn't know if it was something that all Hobie people did.
    2017 Hobie Camo Outback
    2016 Vibe Sea Ghost

  5. #5
    Join Date
    Jun 2014
    Location
    St Mary's County
    Posts
    730

    Default

    If duct tape would have prevented the support rod from bending when I smacked an underwater tree a couple years ago I'd do it. I do not have it on and would be curious what impact it has on performance. Even a small amount of tape on the leading edge could have an adverse, albeit maybe not noticeable, impact.
    Mike
    Pro Angler 14 "The Grand Wazoo"

  6. #6
    Join Date
    Apr 2013
    Location
    Pasadena, MD
    Posts
    2,604

    Default

    Quote Originally Posted by Big Mike View Post
    If duct tape would have prevented the support rod from bending when I smacked an underwater tree a couple years ago I'd do it. I do not have it on and would be curious what impact it has on performance. Even a small amount of tape on the leading edge could have an adverse, albeit maybe not noticeable, impact.
    That was my initial impression...an adverse impact on waterflow over the fins. Perhaps it would be negligible.

    I am heading into fifth year with a Mirage Drive.

    I hit a concrete block in Goodhands Creek at full speed and slightly bent my shafts. The block is oddly placed on the first point to your left as you leave the launch area. You can barely see it at low tide. It is completely submerged at high tide. My drive still functioned even though it was bent and the collision caused no tears in the fins. Tape would not have prevented that damage.

    Only once have I torn a fin. That was in Wye Mills where I hit a stump. In that instance the bottom of the shaft poked through the fin. I removed the fin on the water and realigned it and continued fishing. I replaced the fin later. In that case, the tear was from the inside of the fin out -- the rod pushed through the fin. Tape may have helped, but I doubt it.
    Mark

    Olive Hobie Revo 13
    Hidden Oak Native Ultimate 12

    Author: The Simple Joys of Kayak Fishing (Tips and Tales From an Old Guy in His Plastic Boat)
    Available on Amazon.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •