Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Multiple artifical lures?

  1. #1
    Join Date
    Jan 2013
    Location
    Bowie, MD
    Posts
    63

    Default Multiple artifical lures?

    I was wondering how many people use multiple artificial lures on one line. I'm not really talking about sabiki or umbrellas, but if you are casting soft plastics on a jig heads or even jigging bucktails, etc. It seems like a good idea to multiply your odds of catching (maybe), but maybe it throws off how you work a lure or something. I never see the "professionals" do it on tv, so I wondered if there was a reason. Thanks.
    Hobie Revo 13 (w/ graffiti removed)
    Ocean Kayak Trident 13

  2. #2
    Join Date
    Jun 2011
    Posts
    3,683

    Default

    I troll a tandem rig occasionally. It has a slightly heavier jighead on the end of the line and a lighter jighead or fly teaser 12" to 18" up the line on a short leader. I find that I typically don't catch more fish with the tandem than with a single rig. I troll four lines at a time and have more lures in the water than many other kayak trollers anyway.

    002.jpg

    Many of the charter boats and heavy tackle trollers use a tandem lure rig. It is important to keep the two lures separated and still running cleanly.
    John Veil
    Annapolis
    Native Watercraft Manta Ray 11 and Slayer Propel 10
    Member - Pro Staff team for Native Watercraft

    Author - "Fishing in the Comfort Zone" - light tackle fishing techniques for kayaks and small boats

  3. #3
    Join Date
    Apr 2013
    Location
    Pasadena, MD
    Posts
    2,335

    Default

    Some folks use a dropper fly on a surface lure. For example, tying a Clouser Minnow on a couple of feet of mono or fluorocarbon attached to the back hook of a popper. I've tried it but didn't like the awkwardness of the cast. I'm perfectly happy to catch only one fish at a time.
    Mark

    Olive Hobie Revo 13
    Hidden Oak Native Ultimate 12

    Author: The Simple Joys of Kayak Fishing (Tips and Tales From an Old Guy in His Plastic Boat)
    Available on Amazon.com

  4. #4
    Join Date
    May 2016
    Location
    New Windsor, MD Carroll County
    Posts
    156

    Default

    I do it, I troll with 3 rods and run a tandem setup. This gives me 6 baits in the water with different colors. Usually I run 1/2 to 3/4 on the bottom and a 1/4 to 3/8 on a 6 foot leader. Sometimes they hit the lower and some times the upper. Downside is you have to keep moving.
    2017 Hobie Camo Outback
    2016 Vibe Sea Ghost

  5. #5
    Join Date
    Mar 2015
    Location
    Ocean City MD
    Posts
    124

    Default

    Md regulations limit you to 2 hooks per line. http://www.eregulations.com/maryland...g-regulations/
    To the best ok my knowledge sabiki rigs are not legal here.

    I'd use a dropper rig with a jighead for flounder, & in the past on trolling rigs, but that's all. I havent found for most fishing a second hook to be beneficial.
    Red 2015 Hobie Outback
    Olive 2015 PA 14

  6. #6
    Join Date
    Feb 2012
    Location
    columbia
    Posts
    511

    Default

    I've worked with tandems in various sizes ranging from the huge rigs we use in the early season trolling on the charter boat where both lures may be 9 inch plastic shad on jig heads that are 16 ounces or more, down to 1/8 and 1/16 ounce dart rigs for shad fishing.

    For trolling on the charter boat, we use a 3 way swivel and run a heavier lure on the shorter leader. We will also run a fairly hefty weight ahead of the three way. These range from 6-20 ounces. I figure that no body would want to paddle troll a rig like that. LOL. And umbrella rigs are sorta like towing a 5 gallon bucket, not a lot of fun to retrieve. If you want a peddle kayak workout, this rig is for you. Not me.

    For my shad dart rig, I use a split ring to tie the leaders to, I don't worry about twist with a braided main line. A 3 way would be overkill and something else to get hung up on in the rocky rivers where the shad run.

    I have trolled using a 4 inch and 5 inch Storm Shad from a 3 way swivel without an additional weight from my "electric canoe"
    and I found that the dropper ran about 9 feet deep. I don't troll anymore when I fish for myself, I prefer to cast single lures.

    I use 3-1 as the approximate ratio between the trailing (lighter) lure's leader and the dropper's.
    We run about 6 and 18 feet leaders for the big stuff, and I'll fish the shad darts at 1 foot and 3 feet, respectively.
    A pain in the butt to cast, sorta like using a bobber, as the center of mass causes some rotation, and you have to cast with a slow, slinging motion.
    Last edited by bignose; 03-04-2017 at 10:09 PM.

  7. #7
    Join Date
    Mar 2013
    Location
    Carroll County
    Posts
    560

    Default

    Hey 22,
    I utilize tandem rigs quite often, both casting & trolling.

  8. #8
    Join Date
    Mar 2016
    Location
    Havre de grace, MD
    Posts
    122

    Default

    I usually use a Shad Dart then a Pet spoon trailer about 12'' when I fish for Shad, other than that I am more prone to including spin blades with the lure trailing.
    Sun Camo Feel Free Lure 13.5
    Lowrance Elite 7 ti w/Totalscan
    B & C Power Yachts transom mount
    Minn Kota 45 Riptide
    Wireless Trolling Pro wireless controller
    Re-Lion 75Ah Lithium Iron Deep Cycle

  9. #9
    Join Date
    Apr 2015
    Posts
    277

    Default

    Sometimes I'll do it when vertical jigging. I tie a straight shank hook with a palomar knot leaving two or three feet of tag end. Then tie my jog on the end. The straight hook can be used for bait or a soft plastic.
    It's basically a drop shot rig.


    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Oct 2012
    Location
    Glen Burnie
    Posts
    661

    Default

    Here is something I wrote in a thread about this very subject. It worked very well for me and I found it cheap, versatile and productive.

    Don't know if everybody is familiar with the Johns Skinner flounder rig but it can be seen here.
    https://www.youtube.com/watch?v=KastgsmIFFI
    Nothing fancy just a bottom loop with a dropper loop above a foot above and I imagine many others can claim the rig as well.
    I had made a few for a trip to the shore last summer and they worked well for catching some flounder and sea trout on the trip.

    Still having them on my rods and me being kind of lazy they stayed there for most the rest of the late summer into fall fishing. Found it to be nice all around rig and the two loops gave me many options. Worked well for casting, trolling & jigging.

    Fished it with paddletails or bucktails on the bottom and a bare hook or jig head with Gulp mullet on the dropper. Rattle trap on the bottom also worked well and with a Gulp mullet on the dropper, I'd pick up some nice perch while the stripers would hit both both trolling and jigging. For just perch a top hook with gulp mullet and bottom jighead with gulp was a nice combination. Brought spoons into the mix on the bottom with just a hook with Gulp above and had hits from Stripers, blues and perch on both vertical jigging, trolling and casting. Easy enough to just remove the top rig and just fish a straight bucktail, paddletail or other lure on the bottom and having the little dropper loop in the line did not seem to affect my amount of hookups at all. Throw a weight on the bottom and a hook on the dropper you have a bottom rig. Lots of possibilities that should work with most any species with a simple rig.

    Just thought it worked really well as an all around rig and wondering if anyone has any thoughts or does anything similar. I don't particular like the dropper loop above the main loop and do worry it could affect leader strength. Only downside I found is with some heavier leader it can be hard to pass the doubled line loop through the eye of a jig, hook or lure and large lures that can't pass through the loop are not going to work.
    Last edited by DonV; 03-06-2017 at 08:02 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •