Announcement

Collapse
No announcement yet.

Hobie Cart

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hobie Cart

    Hobie Trax 2 or the Heavy Duty cart?

    Trax 2 big fat tires looks like it would be good for sand and mud but it list for $190.00 at ACK. The Heavy Duty cart is $145.00 but would it be OK for sand and mud
    "Lady Luck" 2016 Red Hibiscus Hobie Outback, Lowrance Hook2-7TS
    2018 Seagrass Green Hobie Compass, Humminbird 798 ci HD SI
    "Wet Dream" 2011 yellow Ocean Prowler 13
    Charter member of Tonkin Gulf Yacht Club

  • #2
    I think Pinch made one for one of his yaks. Looks like it'll fit on a Revo or Outback.
    2015 Hobie Outback (yellow)
    2011 Hobie Outback (yellow)
    2009 OK Prowler Trident 13 Angler (orange)

    Comment


    • #3
      I think I'll roll with the Trax 2 cart-
      "Lady Luck" 2016 Red Hibiscus Hobie Outback, Lowrance Hook2-7TS
      2018 Seagrass Green Hobie Compass, Humminbird 798 ci HD SI
      "Wet Dream" 2011 yellow Ocean Prowler 13
      Charter member of Tonkin Gulf Yacht Club

      Comment


      • #4
        I have the HD cart and it works fine on sand and mud.
        -Jimbo-

        Berkley Powerpro - 100 yrd spool - 30#
        Berkley Powerpro - 100 yrd spool - 20#
        Fishbites - Saltwater version

        Comment


        • #5
          I bought the HD for the Hobie PA because I read that the trax2 was not heavy enough for the PA ........

          Comment


          • #6
            Looks like the only difference between the carts is the wheels they send in the package- same stainless steel frames
            "Lady Luck" 2016 Red Hibiscus Hobie Outback, Lowrance Hook2-7TS
            2018 Seagrass Green Hobie Compass, Humminbird 798 ci HD SI
            "Wet Dream" 2011 yellow Ocean Prowler 13
            Charter member of Tonkin Gulf Yacht Club

            Comment


            • #7
              http://www.austinkayak.com/products/...ayak-Cart.html

              http://www.austinkayak.com/products/...ayak-Cart.html

              Hobie PA weighs 140 lbs unloaded ......... trax 2 capacity is 176 lbs ...... doesn't allow much for gear weight ......... that's why I went with the Heavy duty ......

              But if you have a Revo of an Outback you'll have plenty of carrying capacity
              Last edited by Memory Maker; 09-12-2011, 04:44 PM.

              Comment


              • #8
                Haven't gone that route yet. Seems like a pain to lift and rotate the yak and then try to position the cart into the little holes. I'm sticking with my cradle type cart. Yak slides off/on the cradle easily.
                2015 Hobie Outback (yellow)
                2011 Hobie Outback (yellow)
                2009 OK Prowler Trident 13 Angler (orange)

                Comment


                • #9
                  Had a cradle ........ kept slipping off or collapsing ...........

                  I saw how quick, easy and efficient Lee's (Fjarhead) was and I bought 1 ....... slip it on and slip it off ........ no straps, no slipping and no collapsing .....

                  Comment


                  • #10
                    Funny how one's perspective works. Hmmmmmm.......maybe I should try it.

                    What is the wheel bore of the Trax 2? Of the HD?

                    How about diameter of the vertical poles?
                    2015 Hobie Outback (yellow)
                    2011 Hobie Outback (yellow)
                    2009 OK Prowler Trident 13 Angler (orange)

                    Comment


                    • #11
                      Originally posted by tufnik View Post
                      Funny how one's perspective works. Hmmmmmm.......maybe I should try it.

                      What is the wheel bore of the Trax 2? Of the HD?

                      How about diameter of the vertical poles?
                      Tuf- my Trac 2 came in and I assembled it in five minutes- the support collars were the hardest because you had to fit it to the Outback- it was a simple thing to do once you turned the Outback over- just insert the mounts in the scuppers and then adjust the plastic collars until it touches the scuppers as the center of the yak rests on the center support beam- the wheels appear to be interchangeable from the Trac 2 to the HD- so the axle diameter is the same as is the wheel hub hole that slips over the axle. I know the price is high at $190, but time, materials and labor considered, it would be difficult to duplicate the sturdiness and dependabilty of the cart by a DIY.
                      "Lady Luck" 2016 Red Hibiscus Hobie Outback, Lowrance Hook2-7TS
                      2018 Seagrass Green Hobie Compass, Humminbird 798 ci HD SI
                      "Wet Dream" 2011 yellow Ocean Prowler 13
                      Charter member of Tonkin Gulf Yacht Club

                      Comment


                      • #12
                        Still need info. What is the wheel bore? That is, the axle diameter? 1/2"? 5/8"?
                        Last edited by tufnik; 09-13-2011, 07:50 PM.
                        2015 Hobie Outback (yellow)
                        2011 Hobie Outback (yellow)
                        2009 OK Prowler Trident 13 Angler (orange)

                        Comment

                        Working...
                        X